Menu Close

How to Install a Peephole in a Door

Installing a peephole in your door is a simple and effective way to increase your home’s security. It allows you to see who is outside before opening the door, preventing unwanted entry. In this blog post, we will guide you through the steps to install a peephole in your door.

How to Install a Peephole in a Door

What You Will Need

Peephole kit (available at hardware stores)

  • Drill
  • Hole saw
  • Pliers
  • Screwdriver

Steps to Install a Peephole

Choose the location: Decide on the location of the peephole. It should be at a height that is comfortable for you to look through.

  • Mark the spot: Use a pencil to mark the spot where you want to install the peephole.
  • Drill the hole: Use a drill and a hole saw to drill a hole in the door at the marked spot. Start drilling slowly and gradually increase the speed until the saw cuts through the door.
  • Install the viewer: Insert the peephole viewer into the hole from the outside of the door. If it is a two-piece viewer, screw the two pieces together with pliers.
  • Secure the viewer: Secure the viewer in place with the mounting hardware provided in the kit. Use a screwdriver to tighten the screws.
  • Test the peephole: Test the peephole by looking through it from the inside and outside of the door to ensure that you have a clear view.
How to install a door viewer peep hole

Tips for Installing a Peephole

  • Make sure the drill and the hole saw are the correct size for the peephole kit you are using.
  • Use a level to ensure that the hole is drilled straight.
  • Be sure to follow the manufacturer’s instructions for your specific peephole kit.

In conclusion, installing a peephole in your door is a simple DIY project that can significantly increase your home’s security.

Follow the steps outlined in this blog post to install a peephole in your door and enjoy the peace of mind that comes with being able to see who is outside before opening the door.

Leave a Reply

Your email address will not be published. Required fields are marked *